Chapter 3 System Setup; System Commands; Figure 3-1 Sys Countrycode; Figure 3-2 Sys Date - ZyXEL Communications Prestige 650M-6x User Manual

3.1

System Commands

Syntax:
sys countrycode [0-255]
This command sets the country code, the default is already set. If you need to change the country code,
contact your vendor for a list of valid codes.
An example is shown next.
ras> sys countrycode 225
ras> sys countrycode
country code = 225
ras>
Syntax:
sys date
This command shows the current system date. To set the date set the Prestige to update from the time server,
see Figure 3-7.
An example is shown next.
Syntax:
sys edit<filename>
This command edits a text file. Currently you can edit the autoexec.net file stored in the Prestige. This file is
run on startup. Edit this file to automate commands that you want to execute every time you start the device.
System Setup
This chapter provides the information on system configuration.

Figure 3-1 sys countrycode

ras> sys date
Current date is Thu 2004/08/01
ras>

Figure 3-2 sys date

Prestige 650M-6x User's Guide
Chapter 3
System Setup
3-1