ZyXEL Communications Prestige 650M-6x User Manual page 30

Prestige 650M-6x User's Guide
MAIN
COMMAND
IP
address
arp
ifconfig
ping<hostid>
route
status
tcp
2-6
Table 2-1 Command Summary
SUB-COMMAND
opencmd gdmt
multimode
close
targetnoise
modem_code
[xxx.xxx.x.x]
status
status
add <dest addr>[/<bits>]
<gateway> [<metric>]
drop <host addr> [/<bits>] Use this command to delete an entry in the routing
ceiling <value>
floor <value>
kick <tcb>
irtt<value>
limit <value>
mss <size>
DESCRIPTION
Open ADSL line with G.dmt standard
Open ADSL line in multi modes
Close ADSL line
Adjust target noise offset
Display modem code version.
This command sets or displays the current IP
address of your Prestige.
This command displays arp port statistics of your
Prestige.
This command
Packet Internet Groper is a protocol that sends out
ICMP echo requests to test whether or not a remote
host is reachable.
This command displays the routing information for
static (manually entered) routes.
Use this command to add a static route to the routing
table.
table.
This command displays IP routing statistics.
This command displays tcp statistics.
TCP maximum round trip time.
TCP minimum rtt.
Kicks Transmission Control Block (TCB).
TCP default init rtt.
Sets TCP output window limit.
Maximum Segment Size.
Commands Introduction