Syntax:
lan ipaddr<IP Addr> <Mask>
Use this command to display the IP address and subnet mask for the selected interface.
An example is shown next.
After changing the interface fields you need to save your settings back to the
Syntax:
lan display
This command displays the selected interface settings.
An example is shown next.
Syntax:
lan clear
This command erases the IP address and subnet mask settings for the selected interface.
An example is shown next.
LAN Setup
ras> lan ipaddr 192.168.1.2 255.255.255.0
ras> lan display
Active: Yes
Interface: enif0
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Figure 4-4 lan ipaddr
Prestige to keep them after reboot.
ras> lan display
Active: Yes
Interface: enif0
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Figure 4-5 lan display
ras> lan clear
ras> lan display
Active: Yes
Interface: enif0
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Figure 4-6 lan clear
Prestige 650M-6x User's Guide
4-3