Escape/Enter Switch - Teledyne 6020 Operating Instructions Manual

Photometric Analyzer
the Alarm menue, etc. When modifiable values are displayed on the VFD, the
UP/DOWN switch can be used to increment or decrement the values.

1.4.2 ESCAPE/ENTER Switch

The ESCAPE/ENTER switch is used to input the data, to enter a function,
or to exit a function displayed in the alphanumeric display:
•
•
WARNING:
Escape Moves VFD display back to the previous screen in a
series. If none remains, returns to Analyze mode screen.
Enter Within a menue: the funtion selected is entered moving on
to the next screen in a series.
With Value selected: Enters the value into the analyzer as
data. Advances cursor on VFD to the next operation.
In the Analyze mode: it calls the main menue. Functions
called out by the main menue:
-System
-Span
-Zero
-Alarms
-Range
-Standby Places the analyzer in a sleep mode.
The power cable must be disconnected to fully remove power
from the instrument.
Teledyne Analytical Instruments
Part I: Control Unit
This function is a menu that calls a number
of functions that regulate the analyzer
operation.
This function spans the instrument.
This function zeros the instrument.
This functions sets the alarm preferences.
This function selects whether analyzer is
autoranging or locked on one range.
Part I: 1-3