Installing Or Changing The Password - Teledyne 3000TA-XL-EU Operating Instructions Manual

Operation
Use the ◄► arrow keys to scroll the blinking over to
press Enter to select the password function. Either the default TETAI
password or AAAAA place holders for an existing password will appear
on screen depending on whether or not a password has been previously
installed.
—or—
The screen prompts you to enter the current password. If you are
not using password protection, press Enter to accept TETAI as the
default password. If a password has been previously installed, enter the
password using the ◄► arrow keys to scroll back and forth between
letters, and the ▲▼ arrow keys to change the letters to the proper
password. Press Enter to enter the password.
If the password is accepted, the screen will indicate that the
password restrictions have been removed and you have clearance to
proceed.
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Press Escape to move on, or proceed as in Changing the
Password, below.
4.3.3.2 I
NSTALLING OR
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the
opportunity to change the password:
Teledyne Analytical Instruments
T E T A I
Enter PWD
A A A A A
Enter PWD
PSWD Restrictions
Removed
Change Password?
<ENT>=Yes <ESC>=No
C P
HANGING THE ASSWORD
Change Password?
<ENT>=Yes <ESC>=No
3000TA-XL-EU
PSWD
, and
44