Teledyne 3000TA-XL-EU Operating Instructions Manual page 78

Operation
Select IP and press Enter. The last IP address setting will be shown:
Adjust each field separated by a point using the Up/Down keys and
hop to the next field by using the Right/Left arrow keys. Once the
address is set, press the Enter key. The 3000 microcontroller will send
the new address to the Ethernet Web Enabled co-processor.
The 3000-I series analyzer microcontroller does not query the
Ethernet Web Enabled co-processor on its current IP address. In other
words, The IP address displayed is not necessarily the IP address of the
Ethernet Web Enabled co-processor, Consider this if when replacing the
Ethernet PCB.
Teledyne Analytical Instruments
Ver SysTest Sample
AL-Hld Temp-Set IP
IP NUMBER
172.016.032.254
3000TA-XL-EU
62