Installation
9. Purge the system using sample or zero gas.
10. Power the system back up.
The Insta-Trace sensor will typically reach a stable low value
within 30 minutes or less after installation.
Figure 3-8: Installing the Insta-Trace Micro-fuel Cell
3.5 Testing the System
Before plugging the instrument into the power source:
Check the integrity and accuracy of the gas connections.
Make sure there are no leaks.
Check the integrity and accuracy of the electrical
connections. Make sure there are no exposed conductors.
Teledyne Analytical Instruments
3000TA-XL-EU
34