Table of Contents
Advertisement
5 Measuring Temperatures with the Radiation Temperature Probe
Measuring in the logging mode
2.
Set the main unit to the logging mode, then select a log for the measurement.
See Also
For the logging mode, refer to Chapter 3, "Measuring Temperatures with the Logging Function".
3.
While holding down the [MEASURE] key, turn the non-contact thermo probe towards
the measuring object.
A laser beam is emitted from the non-contact thermo probe and onto the measuring object.
[TIP]
If the laser beam is not being emitted, press the [POINTER] key of the non-contact thermo probe.
4.
Press the [MEMORY] key twice.
Measurement begins.
[TIP]
To stop the measurement, hold down the [ESC] key for about two seconds.
After the specified measurement period elapses, the previous screen displaying the log name is restored.
5.
Hold down the [MEASURE] key on the non-contact thermo probe until the measure-
ment has been completed.
IM 54011-E
-End of procedure-
75
75
Advertisement
Table of Contents
