YOKOGAWA TM20 User Manual page 62

[TIP]
A log name can consist of a maximum of eight
alphanumeric characters.
See Also
For how to enter letters and numbers, refer to
Chapter 6, "How to Input Characters" in the
"Before Use" part.
7.
Press the [SET] key.
A screen for setting the measurement interval appears.
I n t e r v a l
0 0 : 0 0 : 1 0
8.
Enter the hour, minute, and seconds.
I n t e r v a l
0 1 : 1 5 : 3 0
[TIP]
• Set "2 seconds" or more as measurement
interval at the two-channel simultaneous
measurement.
• The definition and range of each input value
is given below.
00:00:00
Indicates the seconds.
The input range is between 0
and 59 seconds
Indicates the minutes.
The input range is between 0
and 59 minutes
Indicates the hours.
The input range is between 0
and 24 hours.
IM 54011-E
4 Setting Up with the Main Unit
9.
Press the [SET] key.
The specified measurement interval is set and the
screen for setting the measurement period (select the
number of days from the options, which also includes
the number of hours, minutes, and seconds) is dis-
played.
ProdDay
0 0 2
10.
Enter the number of days.
11.
Press the [SET] key.
The screen for setting the measurement period (select the
number of hours, minutes and seconds from the options,
which also includes the number of days) is displayed.
ProdTime
0 0 : 0 0 : 0 0
12.
Enter the number of hours, minutes, and
seconds.
ProdTime
0 1 : 3 0 : 0 0
[TIP]
The definition and range of each input value
are given below.
00:00:00
Indicates the seconds.
The input range is between 0
and 59 seconds
Indicates the minutes.
The input range is between 0
and 59 minutes
Indicates the hours.
The input range is between 0
and 23 hours.
53 53 53