Table of Contents
Advertisement
3 Setting Up with the Personal Computer
Creating a comment setting file
Select a comment from a comment table and write (download) it to the connected TM20.
1.
In the Comment Table window, double-click to select the comment to be set in the
TM20.
The row of the selected comment setting then appears highlighted in yellow. To clear the selection, double-click it
again.
2.
Then, click
dow.
Selecting a reference table for replacing abbreviated comments with full
comments
1.
From the File menu, choose Comment Table then Select Reference Table.
Selecting the reference comment table enables the following automatic replacement.
When importing a batch of measured data from the TM20 into an Excel worksheet file, Thermo-Collector searches
through the Abbr. Comment column in the specified comment list file for those that match the comments in the
received data. If it is found, Thermo-Collector fetches the full comment corresponding to the abbreviated comment
from the list, and stores that full comment in the Excel worksheet file instead of the abbreviated comment.
Once the reference comment list file is selected, its filename is displayed in the lower left of the window.
Downloading comments to TM20
To load the comments which have been set, click
38
38
. The selected comment is then copied to the Setup Comments win-
.
- End of procedure -
- End of procedure -
IM 54011-E
Advertisement
Table of Contents
