Table of Contents
Advertisement
9.
Double-click in the "Hi Alarm" column.
The pull-down menu appears.
10.
Select either ON or OFF.
11.
Click in the "Lower Limit" column.
The upper-limit alarm ON/OFF setting is made and the cursor moves to the "Lower Limit" column.
12.
Enter the "Lower Limit" with numeric characters (Example: 135.0).
[TIP]
Enter a value that does not fall below the "Lower Limit" of the probe used for the actual measurement.
The "Lower Limit" that can be measured varies according to the probe used for the measurement.
The specified lower-limit temperature has been set.
13.
Double-click in the "Lo Alarm" column.
The pull-down menu appears.
IM 54011-E
3 Setting Up with the Personal Computer
31
31
Advertisement
Table of Contents
