Table of Contents
Advertisement
"Comment Table" submenu
"Voltage Range Settings" submenu
"Comm" menu
IM 54011-E
New
Opens a new blank comment table.
Open
Opens an existing comment table.
Save
Saves the changes to the open comment table.
Save As
Saves the open comment table under a new
filename.
Select Reference Table
Selects a comment table. Based on this
comment table, abbreviated comment names will
be replaced with the respective full names.
Clear Reference Table
Clears the selection of reference comment table.
Forward to Comment Setup File
Forwards the settings in the open comment table
to the setup file.
New
Opens a new blank voltage setting file.
Open
Opens an existing voltage setting file.
Save
Saves the changes to the open voltage setting file.
Save As
Saves the open voltage setting file under a new
filename.
Send
Sends (downloads) the settings in the open voltage
setting file to the TM20.
Receive
Receives (uploads) the voltage measurement
settings inside the TM20.
Properties
Set the conditions required to communicate with the personal
computer. Below are the setup items
• Communication port
• Baud rate
• Parity
• Data bits
• Stop bits
Receive
Receives from the main unit the measured temperature data and
other data set with the main unit.
3 Setting Up with the Personal Computer
23
23
23
Advertisement
Table of Contents
