Table of Contents
Advertisement
3 Setting Up with the Personal Computer
Selecting the reference tag/log table which should be used to replace
abbreviated names with full names
Instead of abbreviated tag and log names, the longer, more descriptive full names set in a
specified table can be stored along with measured data to an Excel worksheet file. When
receiving a batch of measured data from a TM20, Thermo-Collector searches through the
Abbr. Name column in the specified reference file of tag/log table for names that match the
tag or log names of the received data. If a matching name is found, Thermo-Collector fetches
the full name corresponding to the abbreviated name from the reference table, and stores the
full name in the Excel worksheet file in place of the abbreviated name.
1.
From the File menu, choose Tag/Log Table then Select Reference Table.
Then, select the reference table in the dialog box that appears.
2.
Click Yes to confirm the selection.
Once the reference table is selected, its filename is displayed in the lower-left of the window and the aforementioned
automatic name replacement will take place.
[TIP]
Of course, you can directly set entries in a setup file instead of copying settings from a tag/log table.
Next, proceed to operator name setting.
34
34
- End of procedure -
IM 54011-E
Advertisement
Table of Contents
