YOKOGAWA TM20 User Manual page 22

5.
After inserting the second floppy diskette (Setup Disk #2), click on the [OK] button.
Precautions to be observed prior to installation appears.
6.
Click on the [OK] button.
The installer of the application program is initiated and the "Thermo Collector Setup" screen is displayed.
7.
Click on the [Start Setup] button.
A screen prompting the insertion of the third floppy diskette (Setup Disk #3) appears.
8.
After inserting the third floppy diskette (Setup Disk #3), click on the [OK] button.
[TIP]
Do as follows to change the application install destination.
1.Click on the [Change Directory] button.
2.Select a installation destination folder.
3.Click on the [OK] button.
After installation has been completed, the following confirmation window is displayed.
[TIP]
If the another window is displayed, set the new group name and click [Continue] button. (Select the
name from "group list" when you already have the name you want to use, and click [Continue] button.
9.
Click on the [OK] button.
IM 54011-E
3 Setting Up with the Personal Computer
-End of procedure-
13 13