Table of Contents
Advertisement
6.
Press the [SET] key.
The confirmation screen appears.
Change?
Ye s 1 / N o 0
7.
Press the [1] key.
The operator name is modified and the previous
screen displaying the tag name is restored.
Burger
2 4 ° C
8.
Press the [MEMORY] key.
A
mark is displayed in the measurement screen,
and the measurement is terminated as soon as the
buzzer sounds. The measured value is stored in
memory together with the current time.
Burger
2 4 ° C
The
mark is turned off after the measurement
has been completed.
[TIP]
• If the [MEMORY] key is pressed when
[NewTag] is being displayed, a new tag will
automatically be created. New tags will
automatically be assigned tag names such
as TAG01 and TAG02.
• If the measurement continues with the se-
lected tag, perform step 7 again after step 8
has been performed. With 50 tags, a total
of 5,000 pieces of data can be recorded.
Press the [ESC] key repeatedly to return to the Home
screen.
68
68
68
2 Measuring Temperatures with the Collector Function
-End of procedure-
The procedure below shows the way to
memorize the comments.
1.
Press the [ ] or [ ] key to display the
screen "Tag name".
Burger
5 7 ° C
2.
Press the [4] key.
The comment which are memorized appears.
D i s c a r d
3.
Press the [ ], [ ] key to select the com-
ment.
4.
Press the [SET] key.
Memory?
Ye s 1 / N o 0
5. Press the [1] key.
The comment is stored in memory, then the screen
displaying the tag name is restored.
1
-End of procedure-
IM 54011-E
Advertisement
Table of Contents
