Table of Contents
Advertisement
[TIP]
Use numeric characters and colons to enter a measurement interval. The input range is: hh < 25, mm
< 60, and ss < 60, where "hh" denotes hours, "mm" denotes minutes, and "ss" denotes seconds.
All the interval data must be eight characters or less (i.e. "hh:mm:ss". h, m, and s are optional numeric
characters).
The specified measurement interval has been set.
9.
Click in the "Measuring period" column.
Enter the measurement period with numeric characters, a backslash, and colons
(Example: 003/20:30:00).
[TIP]
Use numeric characters, a backslash, and colons to enter a measurement period. The input range is:
ddd < 1000, hh < 24, mm < 60, and ss < 60, where "ddd" denotes the number of days, "hh" denotes
hours, "mm" denotes minutes, and "ss" denotes seconds.
All the period data must be twelve characters or less (i.e. "ddd:hh:mm:ss". d, h, m, and s are optional
numeric characters).
The specified measurement period has been set.
You can insert and add rows by either of the following ways:
•
Using a shortcut menu that opens by a right-click
•
Using keystrokes of CTRL+I and CTRL+R
10.
Save the table.
From the "File" menu, choose "Tag/Log Table" then "Save As" to save the table.
IM 54011-E
3 Setting Up with the Personal Computer
-End of procedure-
41
41
Advertisement
Table of Contents
