Table of Contents
Advertisement
1.
Press the [FUNC], [2], and [2] keys, in
order.
The "LogChnge" screen appears on the LCD.
F22
LogChnge
2.
Press the [SET] key.
A screen for selecting a log is displayed.
Convey
3.
Press the [ ] key repeatedly until the
log to be modified is displayed on the
screen.
Accept
4.
Use the [CH] key to select the input
channel.
The input channel of the [INPUT] gage is modified.
5.
Press the [SET] key.
A screen for modifying the log name is displayed.
Accept
6.
Enter a new log name to be modified.
IM 54011-E
5 Confirm, Modify, Clear, or Delete the Data with the Main Unit
1 2
0
0
Carry
[TIP]
• A log name can consist of a maximum of
eight alphanumeric characters.
• A tag name that has not been modified is
displayed on the screen. If it needs to be
modified, overwrite it with a new tag name.
See Also
For how to enter letters and numbers, refer to
Chapter 6, "How to Input Characters" in the
"Before Use" part.
7.
Press the [SET] key.
A screen for modifying the measurement interval
appears.
I n t e r v a l
0 0 : 0 0 : 1 0
8.
Enter the hours, minutes, and seconds.
I n t e r v a l
0 0 : 0 0 : 3 0
[TIP]
The definition and range of each input value is
given below.
00:00:00
Indicates the seconds.
The input range is between 0
and 59 seconds
Indicates the minutes.
The input range is between 0
and 59 minutes
Indicates the hours.
The input range is between 0
and 24 hours.
0
59
59
59
Advertisement
Table of Contents
