Fiery EX12 Getting Started Manual page 57

37 Setting up PostScript and/or PCL printing with Windows NT 4.0
7. Click OK to install the Fiery PostScript PPD or PCL PDD (start with step 6 on page 24).
When installation is complete, a new printer window appears, with the name of the
print queue on the NetWare server.
8. Choose Properties from the File menu, and then click the Ports tab.
The NetWare queue you just connected to is listed and checked as a port for the Fiery.
9. Click the General tab and click Print Test Page.
The Fiery polls the NetWare server for print jobs in the print connection defined for
the Fiery. When you print, your PostScript files are spooled to that connection and
transmitted over the queue "port" to the Fiery.
The test page job is listed in the queue window until it is printed.