Fiery EX12 Getting Started Manual page 36

16 Installing User Software on a Windows Computer
11. Click Yes in the Update Driver Warning dialog box.
12. Click Next.
Some files are copied.
13. Click Finish, then close the Printer Port Properties and System Properties dialog boxes.
You must restart your computer in order to activate the new settings. After
Windows 98 restarts, you can complete the procedure described in "To prepare the
printer for parallel port printing:" on page 10.
Completing the Windows 95/98 IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the Fiery. For details, see your NetWare documentation and the
Configuration Guide.
To print from Windows 95/98 computers over IPX (Novell), you must first set up
IPX/SPX protocols, and then configure the Fiery by choosing the IPX port type and
entering the settings for the port you use.
T IPX/SPX
O SET UP PRINTING
1. Click the Start button, choose Settings, and then choose Control Panel.
2. Double-click the Network icon.
Make sure IPX/SPX-compatible Protocol is listed in the Installed Network
Components section.
For instructions, see your Windows 95/98 documentation.
: