Fiery EX12 Getting Started Manual page 43

23 Setting up PostScript and/or PCL printing with Windows NT 4.0
procedure for adding a network printer is similar to adding a port. This procedure is
described in "Completing the Windows NT 4.0 TCP/IP and LPR connection" on
page 33.
The procedure below describes installing the printer drivers from the User
Software CD. This procedure can also be used if you have downloaded the printer files
using the Installer WebTool. The procedures that follow describe setting up the print
connection.
If you are printing using SMB (Server Message Block) you can connect to the Fiery
and install the printer drivers in a single procedure. To configure the Fiery for SMB
printing, see "Setting up SMB printing on Windows NT 4.0" on page 38.
T P S
O INSTALL THE OST CRIPT OR
1. If you are installing from the CD, insert it into the CD-ROM drive.
2. Click Start in the Windows NT 4.0 taskbar, choose Settings, and then choose Printers.
3. Double-click Add Printer.
4. To install a printer locally, select My Computer and click Next.
PCL
PRINTER DRIVER FOR
W NT 4.0:
INDOWS