31 Setting up PostScript and/or PCL printing with Windows NT 4.0
To do this:
Configure the TCP/IP (lpr port)
connection
Configure the IPX (Novell)
connection
Completing the Windows NT 4.0 parallel port connection
The parallel port cable connects the Fiery to a single computer. Once you have
installed the PostScript or PCL printer driver and the Fiery EX12/X12 Color Server PS
or PPD, or the Fiery EX12/X12 Color Server PCL PDD, complete the setup for
parallel port printing.
See:
"Completing the Windows NT 4.0
TCP/IP and LPR connection" on
page 33.
"Completing the Windows NT 4.0 IPX
(Novell) connection" on page 35.