System Requirements; Windows - Fiery EX12 Getting Started Manual

xv System requirements
Calibration files
MRJ
(Mac OS only)
The PostScript printer drivers and printer description files can be installed from
N :
OTE
the User Software CD, or they can be installed from the Fiery with the Installer
WebTool. For instructions, see"Using the Installer WebTool" on page 102.

System requirements

To install the Fiery user software on a Windows or Mac OS computer, the computer
must be equipped with a built-in or external CD-ROM drive.

Windows

To print to the Fiery, you need:
• A Windows-based computer with an 80486, AMD, or Pentium processor
• Windows 95, Windows 98, or Windows NT 4.0 with NT Service Pack 5
• At least 16MB of RAM
With Microsoft Windows 95/98, you also need:
• IPX/SPX or TCP/IP networking protocol installed
• Adobe PostScript Printer Driver for Windows version 4.2 or later (version 4.3 is
included with the user software)
Includes measurements files and targets that you can
use with ColorWise Pro Tools. If you don't have a
densitometer, you can use these files to calibrate the
Fiery.
Mac OS Runtime for Java installer version 2.1.4.
MRJ is required by all Java-based Fiery utilities.
When installing these utilities, if MRJ is not
detected the MRJ installer is automatically
launched.