Fiery EX12 Getting Started Manual page 103

83 Installing Fiery software and fonts
T
O CONFIGURE A CONNECTION TO
1. Launch Fiery Link by double-clicking its icon.
2. Click OK.
Fiery name, device name
(DC12), and IP address
F
IERY SERVERS IN THE LOCAL SUBNET
The Warning dialog box "No Fierys configured, please select a Fiery" appears.
The Edit My Fiery List dialog box opens, and all Fiery servers found appear in the
Available Fierys area of the dialog box. If the Fiery is located on a different subnet an
Error dialog box appears. Click OK to dismiss the dialog box and perform an
Advanced IP search (page 87), or Advanced Subnet search (page 90) to locate the Fiery.
Only servers that support Fiery Link appear in the Available Fierys area.
N :
OTE
: