Fiery EX12 Getting Started Manual page 33

13 Setting up PostScript and/or PCL printing with Windows 95/98
8. From the Manufacturers list, select "(Standard port types)." From the Models list,
select "ECP Printer Port" (not Printer Port). Click OK.
9. Click OK in the (LPT1) Properties dialog box.
You might need to insert the Windows 95 system CD to complete this step,
N :
OTE
depending on whether the required files are on your hard disk.
10. When prompted to restart the computer, click Yes.
After Windows 95 restarts, you can complete the procedure described in "To prepare
the printer for parallel port printing" on page 10.
Perform the following procedure in Windows 98 only if the LPT1 port is not currently
set to ECP Printer Port.
T
O PREPARE THE PORT FOR PARALLEL PORT PRINTING IN WINDOWS
1. Click the Start button, choose Settings, and then choose Control Panel.
2. Double-click System.
The System Properties window appears.
3. Click the Device Manager tab.
98: