Fiery EX12 Getting Started Manual page 22

2 Installing User Software on a Windows Computer
The procedure below describes installing the printer drivers from the User
Software CD or from the Installer WebTool. The procedures after that describe setting
up the print connection.
If you are printing using SMB (Server Message Block) you can connect to the Fiery
and install the printer drivers in a single procedure. To configure the Fiery for SMB
printing, see "Setting up SMB printing on Windows 95/98" on page 19.
T P S
O INSTALL THE OST CRIPT OR
1. Click Start, choose Settings, and then choose Printers to display the Printers window.
2. Double-click the Add Printer icon and click Next.
3. Specify printing using a Local printer and click Next.
This procedure describes installing a printer locally. You can modify the connection
later, according to your network type.
4. In the dialog box displaying lists of manufacturers and printers, click Have Disk.
PCL
PRINTER DRIVER FOR
W 95/98:
INDOWS