Table of Contents
Advertisement
Problem
Image colours
Shooting conditions difficult for
not natural
white balance in auto mode
Date and other
Screen display function is set to off Press DISPLAY button to switch
recording data
not displayed
Brightness of
Brightness of autofocus field and
LCD monitor
surrounding area are different, or
changes during
picture shot in dark place
AF operation
Vertical lines
Known as smudge phenomenon.
appear on image
Occurs when recording bright
subject
I Playback/Deleting
Problem
Cannot play
Mode dial not set to
back image or
SD memory card not inserted or
playback screen
does not contain any files
will not appear
SD memory card not formatted
with this camera
SD memory card contains
incorrectly recorded files
Files on SD memory card in format
not supported by camera
AV cable not properly connected
Source of interference, such as
electric motor, is nearby
SD memory card contact surface is
dirty
Cannot play
Problem with SD memory card
back or
playback screen
will not appear
Image
Battery is exhausted
disappears
Camera was left unoperated so auto
power off function was activated
110
Cause
Cause
(Play)
Remedy
Place a white object near subject,
use flash or set white balance to
mode other than auto.
screen display mode.
Not a malfunction.
Not a malfunction.
Remedy
Set mode dial to
Insert SD memory card that
contains recorded images.
Insert card that has been formatted
and has recorded images with this
camera.
Insert card containing files that
have been correctly recorded.
Check the file format.
Connect the cable properly.
Move camera away from source of
interference.
Clean with soft dry cloth.
Try different card. If no problem, it
is not a camera malfunction. Do not
use card that may have problem.
Charge battery or use AC adapter.
Turn camera on again.
Page
p.54
p.33
––
––
Page
(Play).
p.70
p.26
p.27
p.26
p.70
p.74
––
––
p.27
p.70
p.22
p.24
p.30
Advertisement
Table of Contents
