Table of Contents
Advertisement
3
Press the
white balance (auto, daylight, overcast,
tungsten or fluorescent) and press the
ENTER button.
4
Press the shutter release button.
Note
• In auto mode, subjects lacking white areas may not achieve an
appropriate white balance. When shooting such subjects, add a
white object to the composition.
• The flash will not fire in daylight, overcast, tungsten and fluorescent
light modes.
Macro Mode
Macro mode allows you to take close-up pictures of a subject.
Use macro mode when the distance to the subject is less than
about 40cm in Tele mode and 14cm in Wide mode.
1
Set the mode dial to [
and press the MENU button.
or
button to select the
WHITE BALANCE
AUTO
DAYLIGHT
OVERCAST
TUNGSTEN
FLORCNT.
2001/07/15 11:25
, ,
MENU
Note
25
• Enable the keep settings
N 1600
mode to save the white
balance setting. See "Keep
Settings" (p.96).
Important
• Even with the same subject,
the colours may vary due to
the weather conditions and
light source (tungsten or
fluorescent lighting).
Note
• By using macro mode, you
can record images at a
distance of up to about 4cm
or
]
from your subject.
3
55
Advertisement
Table of Contents
