Table of Contents
Advertisement
Important
• Refer to the instruction
manual for the equipment to
which the camera is
connected.
Note
• You can connect the camera
to the TV using the RICOH
BASE. When connected, the
camera can be operated by
the remote control unit. See
"Using the Remote Control"
(p.105).
74
Playing Files on a TV
By connecting the camera to a TV by the AV cable supplied
with the camera, you can play recorded files on the TV.
I Connecting
1
Check that the camera is turned off.
m m m m See "Turning the Camera On and Off" (p.30).
2
Slide the digital terminal cover switch on
the camera to open the cover and
connect the AV cable to the DIGITAL
(AV/USB) terminal.
3
Connect the other end of the AV cable to
the VIDEO-IN terminal and AUDIO-IN
terminal of the TV.
4
Connect the AC adapter.
Power the camera from a household electrical outlet
using the AC adapter when playing back files on a TV.
m m m m See "Using the AC Adapter" (p.24).
5
Play back the files.
Turn the camera on and set the mode dial to Play mode
[
].
m m m m See "Playing Still Picture/Text/Continuous Files" (p.70).
See "Playing a Voice Memo File" (p.71).
See "Playing a Motion Picture File" (p.73).
I Disconnecting
1
Check that the camera is turned off.
m m m m See "Turning the Camera On and Off" (p.30).
AUDIO-IN
(white)
VIDEO-IN
(yellow)
Advertisement
Table of Contents
