Time Exposure Mode - Ricoh Caplio RR10 Operation Manual

Hide thumbs Also See for Caplio RR10:
Table of Contents

Advertisement

Note
• Enable the keep settings
mode to save the red-eye
reduction setting. See "Keep
Settings" (p.96).
• The red-eye reduction
function cannot be used in
flash off mode.
Important
• Make sure that the camera is
kept steady, when shooting
in time exposure mode.
64
6
Press the shutter release button.
Red-eye reduction display
When you press the shutter release button, the pre-
flash will fire several time in succession before the
main flash fires and the shutter is released.
Important
• The shutter takes about 1 second to release after the shutter
button is pressed. Hold the camera steady during this time.

Time Exposure Mode

You can change the exposure time (1sec, 2sec, 4sec) in time
exposure mode. The shutter stays open for the set time,
enabling you to take a trail, such as fireworks or moving cars in
the dark.
1
Set the mode dial to [
MENU button.
2
Press the
press the ENTER button.
2001/07/15 11:25
] and press the
button to select
MODE SETTING
25
N 1600
and
MENU

Advertisement

Table of Contents
loading

Table of Contents