Mitel 5540 User Manual page 70

Mitel 5540 IP Console - User Guide
To set or cancel a wake-up time while connected to the guest room:
1. Press [S
ET
2. Enter the time using four digits (hh:mm).
For example, for 6:30 enter 0630.
3. Do one of the following:
• Press [S
• Press [P
format, and the hour entered is in the range 01 – 12.)
To set or change a wake-up time when NOT connected to the guest room:
1. Press Function.
2. Press [G
UEST
3. Dial the room number.
4. Follow steps 1-3 from the previous procedure.
To cancel a wake-up call:
1. Press Function.
2. Press [G
UEST
3. Dial the room number.
4. Press [C
LR
5. Press [E
XIT
Note: Some display sets can set their own timed reminder. The above procedures will
also clear or change a reminder already set by the user.
If the guest fails to answer the wake-up call, the system will ring the room twice more at
five-minute intervals. If a third wake-up call goes unanswered or reaches a busy line, the
system may generate a minor alarm at the console.
62
W - ].
AKE UP
] to set the time as AM.
ET
] to set the time as PM. ([P
M
R ].
OOM
R ].
OOM
W - ].
AKE UP
].
] only appears if the system clock is set to 12-hour
M