3Ware 720-0127-02 Manual page 50

Chapter 2. Primary CLI Syntax Reference
The
show rebuild
schedule as illustrated below.
//localhost> /c1 show rebuild
Rebuild Schedule for Controller /c1
========================================================
Slot
--------------------------------------------------------
1
2
3
4
5
6
7
A status of "disabled" indicates that the task schedule is disabled. In this case,
the controller will not use the defined schedule timeslots. If the rebuild
command is entered manually, rebuilding will start within 10 to 15 minutes. It
will begin automatically if a rebuild is needed and a proper spare drive is set
up.
If the rebuild schedule is enabled while a rebuild process is underway, the
rebuild will pause until a scheduled time slot.
Example:
If a unit is in the initialization state at noon on Wednesday and the rebuild
schedule shown above is in use (with schedules disabled), you would see the
following status using the show command:
//localhost>/c1 show
Unit UnitType Status
---------------------------------------------------------------------------
u0 RAID-5 INITIALIZING
Port Status
---------------------------------------------------------------
p0 NOT-PRESENT
p1 OK
p2 NOT-PRESENT
p3 OK
p4 NOT-PRESENT
p5 OK
p6 NOT-PRESENT
p7 OK
p8 OK
p9 OK
p10 OK
p11 OK
42
command displays the current rebuild background task
Day Hour
Mon 2:00pm
Thu 7:00pm
- -
- -
- -
Mon 1:00am
Sun 12:00am
%Cmpl Stripe
0 64K
Unit Size
- -
u0 76.33 GB
- -
u0 76.33 GB
- -
u0 76.33 GB
- -
u0 76.33 GB
u0 74.53 GB
u0 74.53 GB
u0 74.53 GB
u0 74.53 GB
3ware 9000 Series Serial ATA Controller CLI Guide
Duration Status
10 hr(s) disabled
18 hr(s) disabled
- disabled
- disabled
- disabled
4 hr(s) disabled
1 hr(s) disabled
Size(GB) Cache AVerify
521.466 ON
Blocks Serial
- -
160086528 Y2NXL7FE
- -
160086528 Y2NXLB9E
- -
160086528 Y2NXQPZE
- -
160086528 Y2NXM4VE
156301488 3JV3WTSE
156301488 3JV3WRHC
156301488 3JV3WQLQ
156301488 3JV3WQLZ
IgnECC
OFF OFF