Syntax; Alarms [Cid - 3Ware 720-0127-02 Manual

9000 series serial ata raid controller
Table of Contents

Advertisement

Chapter 3. Legacy CLI Syntax Reference

Syntax

alarms
alarms c<c> [c<c> ...]
With the 9000 series, the alarms can be viewed multiple times with the CLI,
but will be lost following a reboot. At this time there is no CLI option to clear
the alarms log.
cid
alarms [
...]
This command displays all available alarms on a single controller, multiple
controllers, or on all controllers. Invoked without cid, displays alarms
associated with all detected controllers.
A listing of AEN codes can be found in the "Troubleshooting:
Note:
Problems and Solutions" section of 3ware 9000 Series Serial ATA RAID
Controller User Guide.
Typical output looks like:
tw_cli> alarms
Ctl
Date
--------------------------------------------------
c0
-
-
c1 [Fri Nov 28 04:26:31 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=2
c1 [Fri Nov 28 06:13:54 2003] INFO
c1 [Fri Nov 28 06:30:35 2003] INFO
c1 [Fri Nov 28 06:33:00 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=0
c1 [Fri Nov 28 06:33:04 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=4
c1 [Fri Nov 28 06:33:46 2003] INFO
c1 [Fri Nov 28 06:37:58 2003] INFO
c1 [Fri Nov 28 07:51:34 2003] INFO
c1 [Fri Nov 28 07:59:43 2003] INFO
c1 [Mon Dec
1 02:26:12 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=3
110
Warning!
3ware does not recommend installing both 3DM and CLI.
Conflicts may occur. If both are installed, alarms will be captured
only by 3DM.
Warning!
3DM and CLI handle alarms differently. When using CLI with the
7/8000 series, save the alarm data immediately after viewing it.
Once the alarms are viewed using CLI, they cannot be viewed
again.
Severity
Message
ERROR: Unit degraded: Unit #0
(0x04:0x000B): Rebuild started: unit=0
(0x04:0x003B): Background rebuild paused: unit=0
(0x04:0x000B): Rebuild started: unit=0
(0x04:0x000B): Rebuild started: unit=0
(0x04:0x0005): Background rebuild done: unit=0
(0x04:0x0005): Background rebuild done: unit=0
3ware 9000 Series Serial ATA Controller CLI Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

9500s9550sx

Table of Contents