cid
sched verify
This command removes (or unregisters) the verify background task in slot
slot_id.
For example:
//localhost> tw_cli sched verify c1 remove 3
Removes the verify background task in slot 3.
cid
sched verify
This command enables all verify background tasks on controller cid.
Note:
When enabling the verify schedule you must also remember to also
enable the autoverify setting for the arrays to be verified. For details, see "set
autoverify cid uid on|off" on page 112.
cid
sched verify
This command disables all verify background tasks on controller cid.
sched selftest
This command displays the current selftest background task as illustrated
below.
//localhost> tw_cli sched selftest c1
Selftest Schedule for controller /c1
========================================================
Slot
--------------------------------------------------------
0
1
2
3
4
5
6
www.3ware.com
slot_id
remove
Warning: If all timeslots are removed, be sure to also disable the
schedule. Otherwise the applicable background task will never
occur.
enable
disable
cid
Day
Hour
Sun
12:00am
Mon
12:00am
Tue
12:00am
Wed
12:00am
Thu
12:00am
Fri
12:00am
Sat
12:00am
Sched Commands
UDMA
SMART
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
107