Sched Rebuild Cid Enable; Sched Rebuild Cid Disable; Sched Verify Cid; Sched Verify Cid Add Dday Hhour Tduration - 3Ware 720-0127-02 Manual

Chapter 3. Legacy CLI Syntax Reference
sched rebuild
This command enables ALL rebuild background tasks on controller cid.
sched rebuild
This command disables ALL rebuild background tasks on controller cid.
cid
sched verify
This command displays the current verify background task as illustrated
below.
//localhost> tw_cli sched verify c1
Verify Schedule for controller /c1
========================================================
Slot
--------------------------------------------------------
0
1
2
3
4
5
6
cid
sched verify
This command adds a new background verify task to be executed on day
(range 0 .. 6, where Sunday is zeroth day of the week), at hour (range 0 .. 23),
for a duration of duration (range 1 .. 24) hours. This command will fail if no
(empty) slot is available.
For exmaple:
//localhost> tw_cli sched verify c1 add d0 h16 t3
Adds a verify background task to be executed on Sundays at 4:00 PM for a
duration of 3 hours.
Note: The new schedule is added to the first available slot. Events do not
need to be added in sequential order.
106
cid
enable
cid
disable
Day Hour
Mon 2:00am
- -
Tue 12:00am
Wed 12:00am
Thu 12:00am
Fri 12:00am
Sat 12:00am
day hour
add d h
3ware 9000 Series Serial ATA Controller CLI Guide
Duration Status
4 hr(s) disabled
- -
24 hr(s) disabled
24 hr(s) disabled
24 hr(s) disabled
24 hr(s) disabled
24 hr(s) disabled
duration
t