Sched Rebuild Cid; Sched Rebuild Cid Add Dday Hhour Tduration; Sched Rebuild Cid Remove Slot_Id; This Command Removes The Rebuild Background Task In Slot Slot_Id - 3Ware 720-0127-02 Manual

9000 series serial ata raid controller
Table of Contents

Advertisement

sched rebuild
This command displays the current rebuild background tasks as illustrated
below.
//localhost> tw_cli sched rebuild c1
Rebuild Schedule for controller /c1
========================================================
Slot
--------------------------------------------------------
0
1
2
3
4
5
6
sched rebuild
This command adds a new background rebuild task to be executed on day
(range 0 .. 6, where Sunday is zeroth day of the week), at hour (range 0 .. 23),
for a duration of duration (range 1 .. 24) hours. This command will fail if no
(empty) slot is available.
Note: The new schedule is added to the first available slot. Events do not need
to be added in sequential order
For example:
//localhost> tw_cli sched rebuild c1 add d0 h16 t3
Adds a rebuild background task to be executed on Sundays at 4:00 PM for a
duration of 3 hours.
sched rebuild
This command removes (or unregisters) the rebuild background task in slot

slot_id.

For example:
//localhost> tw_cli sched rebuild c1 remove 2

Removes the rebuild background task in slot 2.

www.3ware.com
cid
Day
Hour
Mon
2:00pm
Thu
7:00pm
-
-
-
-
-
-
Mon
1:00am
Sun
12:00am
cid
day
add d
h
cid
remove slot_id
Warning:
If all time slots are removed, be sure to also disable the
schedule. Otherwise the applicable background task will never
occur.
Duration
10 hr(s)
18 hr(s)
-
-
-
4 hr(s)
1 hr(s)
hour
duration
t
Sched Commands
Status
disabled
disabled
-
-
-
disabled
disabled
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

9500s9550sx

Table of Contents