Specifications - Sharp DK-A10H Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 220 - 240 V, 50 Hz
Power con- Power on: 34 W
sumption
Power stand-by: 0.6 W (*)
Output power Front Speaker:
RMS: 4 W (2 W + 2 W) (10% T.H.D.)
RMS: 4 W (2 W + 2 W) (0.9% T.H.D.)
Subwoofer:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 6 W (3 W + 3 W) (0.9% T.H.D.)
Speaker 1-way type light-up speaker system
Front Speaker: 6.5 cm (2-1/2") - 12 ohms - Full
Range
Subwoofer: 10 cm (4") - 8 ohms - Woofer
Speaker Front Speakers: 4W/ Channel
maximum Subwoofer: 10W / Channel
input power
Speaker rated Front Speakers: 2W / Channel
input power Subwoofer: 5W / Channel
Output Headphones: 16 - 50 ohms
terminals (recommended: 32 ohms)
Video output: 1Vp-p
Input Auxiliary (audio signal):
terminals 500 mV/47 k ohms
Dimensions Width: 500 mm (19-11/16")
Height: 150 mm (5-7/8")
Depth: 250 mm (9-7/8")
Weight 5.3 kg (11.7 lbs.)
*This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 10 to
cancel the demonstration mode.
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
CD player
Type Single disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter Multi bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
DK-A10H
DK-A10H(BK)
35