System Connections - Sharp DK-A10H Operation Manual

System connections (continued)
DK-A10H
DK-A10H(BK)
Connecting iPod to TV
iPod photo and 5th Generation iPod with photo and video can be
view by connecting to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket on the rear of the unit.
Note:
Please make sure to set iPod unit to either NTSC or PAL to match
the TV signal. Please visit Apple's home page for further information.
AC power connection
After checking all the connections have been made correctly, plug the
AC power lead of this unit into the wall socket. If you plug in the unit first,
the unit will enter the demonstration mode.
To AC input
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
10
TV
Video cable
(not supplied)
To video
input socket
Wall socket
(AC 220 - 240 V, 50Hz)
Demonstration mode
The first time the unit is plugged in,
the unit will enter the demonstra-
tion mode. Lights on the snooze
button, subwoofer and around the
disc slot will blink.
To cancel the demonstration
mode:
When the unit is in the
demonstration mode, press the
E SOUND/DEMO button. The unit
will enter the power stand-by
mode (low power consumption
mode).
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the
E SOUND/DEMO button again.
Note:
When the power is on, the E SOUND/DEMO button can be used to
select the E SOUND mode.