To turn the power on
Press the ON/STAND-BY button to turn the power on. Lights on the
snooze button, Subwoofer and around the disc slot will light up.
iPod dock door will automatically open when the power is on.
Press the ON/STAND-BY button to enter the power stand-by mode
or demonstration mode.
Illumination light control
Press the SNOOZE/DIMMER button to adjust the brightness of the
display and illumination light.
IIIumination light and display bright
IIIumination light and display dim
IIIumination light off and display gets dimmer
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Main unit and remote control operation:
Press the VOL (+ or –) button to increase or decrease the volume.
E SOUND control
When the E SOUND/DEMO button is pressed, the current mode set-
ting will be displayed. To change the setting, press the E SOUND/
DEMO button repeatedly to toggle ON or OFF. When ON is selected,
the unit will enter the E SOUND mode and adjust low bass and high
frequency automatically according to volume input.
When the EQ button is pressed, the current mode setting will be
displayed. To change to a different mode, press the EQ button
repeatedly until the desired sound mode appears.
For rock music.
For classical music.
For pop music.
Vocals are enhanced.
When the FUNCTION button on remote control is pressed, the
current function will change to different mode, press the FUNCTION
button repeatedly to select desired function.
Tuner FM ST
The backup function will protect the memorised function mode for a
few days should there be a power failure or the AC power lead
Tuner FM mono