Listening To The Radio - Sharp DK-A10H Operation Manual

Listening to the radio (continued)
DK-A10H
DK-A10H(BK)
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 23.
2
Press the MEMORY button to enter the preset tuning
saving mode.
3
Within 1 minute, press the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 1 minute, press the MEMORY button to store that
station in memory.
If the preset number indicators disappear before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead becomes
disconnected.
24
or button to select the
To recall a memorised station
Press the or button for less than 0.5 seconds to select the
desired station.
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
1 Press the or button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the or button again when the desired
station is located.
To erase entire preset memory
1 Press and hold the CLEAR button for more than 3 seconds.
"TUN CLEAR" will be displayed.
2 Within 10 seconds, press the MEMORY button.
"COMPLETE" will be displayed.