Sharp DK-A1H Quick Start Manual

MODEL
DK-A1H
DK-A1H(BK)
MUSIC SYSTEM FOR iPod
This quick Start Guide will help you to correctly install and
operate your system.
Illustration printed in this quick guide are for the model DK-A1H.
Accessories
Remote control x 1 AM loop aerial x 1
AC power lead x 1
Turn on your system
The first time the unit is plugged in, the unit will enter the
demonstration mode.
1
Press the ON/STAND-BY button to turn the power on.

System connections

FM aerial
TV
To video
input socket
®
FM aerial x 1
iPod adaptor x 8
AM loop aerial
Video Cable
(not supplied)
Before using remote control
Before using remote control, please remove plastic shield at
battery holder.
Remote controller

Remote control battery installation

Use the "CR 2025", coin lithium battery.
1
Whilst pushing the locking tab towards the centre of the
remote control, slide out the battery holder.
2
Remove the old battery from the battery holder, insert the
new battery and then slide the battery holder back into the
remote control.
Battery holder
Polarity (+) symbol
Locking tab
Battery type
To AC input
Plastic shield
Battery holder
Back of remote control
Locking tab
Positive (+) side up
Wall socket
(AC 220 - 240 V, 50 Hz)
TINSEA181AWZZ
07C R AS 1