Apple Inc. Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Accessories Please confirm that only the following accessories are included.
SPECIAL NOTES CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire.
IMPORTANT SAFETY INSTRUCTIONS (continued) 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following...
® ENERGY STAR Program Information Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. ® ENERGY STAR is a U.S. registered mark. Contents General Information Precautions ....... 6 Controls and indicators .
Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
[DO NOT USE UNSPECIFIED AC ADAPTOR - - -] MADE IN MALAYSIA MARKETED BY : SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07495 - 1163 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:...
DK-AP7P System connections Make sure to unplug the AC/DC adaptor before making any connections. Connecting iPod or iPhone to TV Photo and video files from iPod or iPhone can be viewed by connecting the system to TV/monitor. If the TV/monitor has a video input, connect it to the VIDEO OUT jack at the back of the unit and set the TV Out on the iPod or iPhone unit to “ON”...
Using with the batteries Use 4 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. Open the battery cover. Slide the cover in the direction of the arrow. Insert the batteries according to the direction indicated in the battery compartment.
DK-AP7P General control – To turn the power on Press the ON/STAND-BY button to turn the power on. The POWER and E indicator will turn on. SOUND After use: Press the ON/STAND-BY button to enter the power stand-by mode. The POWER indicator will turn off. Note: This unit consumes low current during stand-by mode.
Please use the adaptor supplied with your iPod unit. If you have an iPod that does not have an iPod 30 Pin connector, you can use an audio cable to connect it to the AUX IN jack. Capacity 30GB...
Listening to the iPod or iPhone (continued) To insert iPod or iPhone adaptor 1. Insert the adaptor into unit and connect your iPod or iPhone. iPhone (bottom) Dock connector iPhone adaptor iPhone dock iPhone connector Caution: Unplug all accessories for the iPod or iPhone before inserting it into the dock.
Enhancing your system The audio cable is not included. Purchase a separate audio cable as shown below. Portable audio player Computer To the line output jack Audio cable (not supplied) Listening to the audio/video sounds from por- table audio player, computer, etc.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom When a button is pressed, the unit does not respond.
Do not apply oil to the inside of the unit. It may cause malfunctions. Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.