Specifications; 2009 September 25 - Sharp DK-E7P Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
General
Power source DC IN 6V 2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
DC IN 6V [ "AA" size (UM/SUM-3, R6 or
HP-7) battery x 4]
Power Power on: 7 W
consumption Power stand-by: 0.6 W(*)
Output power Front speakers:
RMS: 2.4 W (1.2 W + 1.2 W) (10% T.H.D.)
RMS: 0.72 W (0.36 W + 0.36 W) (1% T.H.D.)
Subwoofer:
RMS: 2 W (10% T.H.D.)
RMS: 0.81 W (1% T.H.D.)
Speaker 2.1-way type speaker system
Front speaker: 3.0 cm (1-1/8")
Subwoofer: 4.6 cm (1-3/4")
Speaker maximum Front speaker: 2.0 W / channel
input power Subwoofer: 4 W
Speaker rated Front speaker: 1.2 W / channel
input power Subwoofer: 2 W
Output terminals Video output: 1Vp-p
Input terminals Auxiliary (audio signal): 250 mV/47 k ohms

2009 September 25

Dimensions Width: 198 mm (7-4/5")
Height: 69.8 mm (2-7/10")
Depth: 77 mm (3")
Weight 0.62 kg (1.4 lbs.)
(*) This power consumption value is obtained when in the power
stand-by mode.
DK-E7P_A6_EN_SCEE.mif
DK-E7P
ENGLISH
E-12