Maintenance; Specifications; Cleaning The Unit - Sharp DK-CL8PHBK Operation Manual

DK-CL8PH

Maintenance

ENGLISH

■ Cleaning the unit

Periodically wipe the unit with a clean soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.).
It may damage the unit finishing.
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-17

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior not ice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
■ General
Power source DC IN 9V
(AC 100 - 240 V ~ 50/60 Hz)
Clock Backup: 3V
accessory AAA type battery use) x 2
Power Power On: 15 W
Power stand-by: 0.4 W (*)
consumption
Output power Front speakers:
RMS: 4 W (2 W + 2 W) (10% THD)
RMS: 2 W (1 W + 1 W) (1% THD)
Subwoofer:
RMS: 4 W (10% THD)
RMS: 2.5 W (1% THD)
Speaker 2.1-way type speaker system
Front speaker: 4cm (1 1/2")
Subwoofer: 7cm (2 3/4") Woofer
Speaker maximum 8 W/Channel
input power
Speaker rated 4 W/Channel
input power
Output terminals Video output: 1Vp-p
(*) This power consumption value is obtained when in the power
stand-by mode and dimmer 2.
2500mA: AC/DC adaptor
(not include as
Full Range (x2)