Removing The Drop-In Door Trim; Removing The Snap-On Door Trim; Adjusting The Refrigerator Shelves - Whirlpool Refrigerator Use And Care Manual

Removing the drop-in door trim
(on some models)
To remove the trim piece:
1.
Remove all items from the shelf.
2.
Pull straight up on the trim piece at each end.
To replace the trim piece:
1.
Locate each end of the trim piece above the trim
pocket opening.
2. Push the trim piece straight down until it stops.
3. Replace items on the shelf.
Removing the snap-on door trim
To remove the trim piece:
1.
Remove all items from the shelf.
2. Pull out on the inside tab at each end.
3. Lift trim piece straight out.
To replace the trim piece:
1.
Line up ends of the trim piece with the button on the
door liner wall.
2. Push trim piece straight back until it snaps securely
into place.
3. Replace items on the shelf.
)
Adjusting the refrigerator shelves
Adjust refrigerator shelves to match the way you use
your refrigerator.
To remove the shelves:
1.
Remove all items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift the front slightly.
4. Slide shelf out the rest of the way.
To replace the shelves:
1.
Fit back of shelf on top of guide with wire stops on
the bottom of the guide.
2. Lift the front.
3. Slide shelf in until it clears all stops.
Wlre stop fly-
Guide stop d-
Shelf guide -7-
7