Changing The Control Settings; Removing The Drop-In Door Trim - Whirlpool ET22PKXDN00 Use And Care Manual

Changing the control settings
If you need to adjust temperatures in refrigerator or
freezer, use the settings listed in the chart below as
a guide. If you have any questions, call our Consumer
Assistance Center number, 1-800-253-i 301, from
anywhere in the U.S.A.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section too warm
REASON:
l
Door opened often
l
Large amount of food added
l
Room temperature too warm
RECOMMENDED SElTINGS:
Refrigerator
Freezer
6
A
Freezer section
too warm
l
Door opened often
l
Large amount of food added
l
Very cold room temperature
(can't cycle often enough)
4
D
Refrigerator
section too cold
l
Controls not set correctly for your conditions
2
D
Ice not made
fast enough
l
Heavy ice usage
l
Very cold room temperature
(can't cycle often enough)
4 D
Both sections
too warm
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room temperatures
6
B
Removing the drop-in door trim
(on some models)
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at each end.
To replace the trim piece:
I \\
1. Locate each end of the trim piece above the trim
pocket opening.
2. Push the trim piece straight down until it stops.
3. Replace items on the shelf.