Removing The Snap-On Door Trivet; Removing The Drop-In Door Trim; Adjusting The Door Bins - Whirlpool ED25DQXDB00 Use And Care Manual

Removing the snap-on door trivet
(on some models)
To remove the trivet:
1.
Remove all items from the shelf.
2. Pull out on the inside tab at each end.
3. Lift trivet straight out.
To replace the trivet:
1.
Line up ends of the trivet front with the button on the
door liner wall.
2. Push trivet front straight back until it snaps securely
into place.
3. Replace items on the shelf.
Removing the drop-in door trim (dispenser area)
Remove the trim above the dispenser area for easier
cleaning.
To remove the trim piece:
1.
Remove all items from the shelf.
2. Pull straight up at each end of the trim piece.
To replace the trim piece:
1.
Line up each end of the trim piece above the trim
pocket opening in the door liner wall.
2. Push the trim piece straight down until it stops.
3. Replace items on the shelf.
Adjusting the door bins
To remove door bins:
1.
Lift bin up.
2. Pull bin straight out.
To replace door bins:
1.
Slide bin in above desired support button.
2. Push down until it stops.
011
Support
button