Table of Contents
Advertisement
E
NSURING PROPER AIR
CIRCULATION
In order to ensure proper temperatures, you
need to permit air flow between the two
sections. As shown in the illustration, cool
air enters through the bottom of the freezer
section (1) and moves up. Most of the air
then flows through the freezer section vents
(2) and recirculates under the freezer floor
(3). The rest of the air enters the fresh
section through the top vent (4).
Do not block any of these vents
(1, 2, 3, or 4) with food packages. If the
vents are blocked, air flow will be prevented
and temperature and moisture problems
may occur.
IMPORTANT: Because air circulates
between both sections, any odors formed in
one section will transfer to the other. You
must thoroughly clean both sections to
eliminate odors. To prevent odor transfer
and drying out of food, wrap or cover foods
tightly. (See the "Food Storage Guide"
section for details.)
R
EMOVING THE
-
DROP
IN DOOR TRIM
To remove the trim piece:
1.
Remove all items from the shelf.
2.
Pull straight up on each end of the trim
piece.
To replace the trim piece:
1.
Locate each end of the trim piece above
the trim pocket opening.
2.
Push the trim ends straight down until
they stop.
3.
Replace items on the shelf.
10
2
1
3
1
4
Advertisement
Table of Contents
