Refrigerator; Changing The Control Settings; Removing The Drop-In Door Trim Pieces - Whirlpool ET14JMXBN00 Use And Care Manual

Changing the control settings
If you need to adjust temperatures in refrigera-
l
Adjust the Refrigerator Control first.
tor or freezer, use the settings listed in the
chart below as a guide. If you have questions,
l
Wait at least 24 hours between adjust-
ments.
call our Consumer Assistance Center number,
1-800-253-l 301.
l
Then adjust the Freezer Control if needed.
CONDITION:
REASON:
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
Freezer
Refrigerator
section
too warm
l
Door opened often
l
Large amount of food added
l
Room temperature too warm
Freezer
section
too warm
l
Door opened often
l
Large amount of food added
l
Very cold room temperature
(can't cycle often enough)
Refrigerator
section
too cold
l
Controls not set correctly
for your conditions
Ice not
made fast
enough
l
Heavy ice usage
l
Very cold room temperature
(can't cycle often enough)
Both
sections
too warm
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
Removing the drop-in door trim pieces
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at
each end.
I \
\
To replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until
it stops.
3. Replace items on the shelf.
9