Outgoing And Incoming Calls; Calling Users; On-Hook Dialling - Siemens Profiset 30isdn Operating Instructions Manual

Outgoing and incoming calls

Calling users

On-hook dialling

or
c
Lift the handset.
T
Enter the call number.
The call number is dialled and appears on the display.
You can enter (or change) the call number and then set up
the connection when the handset is on-hook.
Enter the call number (automatic dialling is possible).
T
Backspace to delete with
c and d
Lift the handset and talk.
l
Set up the connection via the Loudspeaker key;
d
Lift the handset in order to be able to talk.
There is also another way of on-hook dialling.
(Caution: Editing the entered number is not possible!)
l
Press the Loudspeaker key.
Enter the call number (automatic dialling is possible).
T
The call number is dialled.
c and d
Lift the handset and talk
l
With the Loudspeaker key you can activate/deactivate
open listening.
Outgoing and incoming calls
If "Display of charge/call time of the active call"
is activated ( page 35) the display alternates
between call number and call charge/call time.
-
.
9