Activating/Deactivating The Display Of Charge/Call Time Of The Last Outgoing Call - Siemens Profiset 30isdn Operating Instructions Manual

Programming the telephone settings
Activating/deactivating the display of charge/call time of the last outgoing
call
36
T
Enter the password if necessary.
0 or 1
Press key 0 or 1.
S
Save the setting.
The charge and call time for the last outgoing call (if it is
activated) are displayed for approx. 10 seconds after the
handset has been lifted and replaced.
Enter 0 or 1 to deactivate or activate the display of charge:
In the as-supplied condition, the display of charge/call
time of th last outgoing call is activated.
a
Handset is on-hook.
S17
Start the programming procedure.
T
Enter the password if necessary.
0 or 1
Press key 0 or 1.
S
Save the setting.
"0" Display of charge /call time of the last outgoing
call is deactivated
"1" Display of charge /call time of the last outgoing
call is activated
There may be differences between the device's
meter and the charge meter of the switching
centre. The charge meter of the network opera-
tor is definitive for the telephone bill.